Omnicoll fraction collector
SPECIFICATIONS:

Fraction range: (either in linear or meander-like collection)

Normal modus:

Time: 0.1 to 999.9 minutes in 0.1 min. steps
Volume: 0.01 to 500 ml (external counts using Preciflow pump)

same as above with the possibility of time pause (from 0 to 999.9 minutes) between fractions

collector takes a single fraction upon an external voltage pulse of 3-12 V (or 12-30 V with a 3300 Ohm resistor)

collector takes 1 to 999 fractions after reception of a single voltage impulse of 3-12 V
(or 12-30 V with a 3300 Ohm resistor)

Capacity: using supplied Nalgene racks	any tube racks or container type on the surface 45 x 31cm 216 tubes 16 mm diameter 160 tubes 20 mm diameter 96 tubes 30 mm diameter The capacity can be increased many times by coupling of several lower parts of Omnicoll
Power supply:	9 V / 12 W (mini-power supply 90-240 V / 50-60 Hz, CE)
Operating temperature:	0-40 C
Relative humidity:	0-90 %
Weight:	6.5 kg
Dimensions:	34 (W) x 30 (H) x 49 (D) cm
Fuse:	1.5 A (on print board)

Contact no.:
1	Input remote control 0 V (blue)
2	Impulses of the stepping motor of the Preciflow pump (0 and 12 V) (green)
3	Input voltage 0 V (white)
4	Input voltage + 9 V (red)
5	Output remote control for the pump (+ 9-12 V) (brown)
6	Input remote control (+ 3-12 V or 12-30 V with 3300 Ohm resistor) (yellow)

Fractionation:	time 0.1-999.9 min in 0.1 min steps or 1-9999 min volume 0.01 to 500 ml, or 0.1 to 30 l through external signal or RS232 (option) with or without a pause from 0.1 to 999.9 min or 1 to 9999 min
Tube capacity:	according to your choice (available surface of 45 31 cm) eg. using Nalgene economy racks: 216 tubes 13-16 mm diam. 160 tubes 20 mm diam. 96 tubes 30 mm diam. Capacity can be increased several times
Power supply:	9 V / 12 W, using power supply plug for 90 to 240 V, 50-60 Hz
Safety:	meets CE and IEC 1010/1 norm for laboratory instruments
Operating temperature:	0 to 40 °C
Weight:	6.5 kg
Dimensions:	34 x 30 x 49 cm (W x H x L)
Guarantee:	2 years